Sprinkler Grid — Irrigation, Repair, Installation (407) 883-2577
  1. Home
  2. Sprinkler repair

Sprinkler repair in the Orlando area

Broken heads, leaks, valves, wiring and controllers. We find what failed, show you, and fix it.

What we repair

  • Sprinkler heads. Broken, sunken, tilted or clogged sprays and rotors, replaced with a matching head and nozzle.
  • Leaks. Cracked fittings, split lateral lines and mainline breaks, located and repaired.
  • Valves. Zones that will not open or will not close: solenoids, diaphragms or the whole valve.
  • Wiring. Cut, corroded or shorted field wire and bad splices in valve boxes.
  • Controllers. Dead displays, lost programs, zones that skip, and rain sensors that no longer work.
  • Pumps. Irrigation pumps on lake or well supplies that lose prime or will not start.
Technician holding a broken sprinkler head with water bubbling from the open line
A broken head on a pressurized line

Diagnosis before parts

A dry patch can be a clogged nozzle, a failed valve, a leak upstream or a controller setting. Replacing parts until it improves wastes your money, so we test first.

We run each affected zone, check pressure and coverage, test the valve and wiring where needed, and tell you what we found before starting the repair. When a repair is finished we run the zone again so you can see it working.

If you can, send a photo or short video on WhatsApp before the visit. It often tells us which parts to bring.

Hand holding a removed irrigation valve beside an open valve box in a lawn
A failed valve removed from its box

Reclaimed water and older systems

Many West Orange neighborhoods irrigate with reclaimed water through purple pipe. It is good for the lawn and hard on small parts: nozzles and filters clog sooner, and they need cleaning or replacing as part of any repair.

On systems that are 20 years old or more, one failure is often a sign of others close behind. We will point out what else is near the end of its life so you can decide what to do now and what can wait.

PVC irrigation pipe repair with new fittings in an open excavation
New fittings on a repaired line

How a repair visit works

  1. Tell us the symptom

    Call or message with what you are seeing. A photo or video helps.

  2. We test the system

    We run the zones involved and check valves, wiring and pressure as needed.

  3. You hear what we found

    We explain the cause and the repair before we start.

  4. Repair and re-test

    We make the repair and run the zone again to confirm it.

Questions about sprinkler repair

How much does sprinkler repair cost?

It depends on what has failed. A single head is a small job; a mainline leak or a wiring fault takes longer to locate. Call or WhatsApp (407) 883-2577, describe the problem, and we will explain what the visit involves.

What should I do if a sprinkler line is gushing water?

Turn the controller off. If water keeps flowing, close the irrigation shut-off valve, usually near the backflow preventer or water meter. Then contact us to repair the break.

Why is my water bill suddenly high?

An irrigation leak is a common cause. A valve that does not close fully or a cracked underground pipe can lose a lot of water without leaving an obvious puddle. We can check the system for leaks.

Do you repair all brands of sprinkler systems?

Yes. We repair systems using Hunter, Rain Bird and other common residential and commercial brands.

Tell us what your system is doing.

Call or send a WhatsApp message with a photo or short video of the problem. We speak English, Spanish and Portuguese.

CallWhatsApp